Stainless steel elbow need to do maintenance work, so that you can increase the use of time, then the stainless steel elbow if the specific maintenance work?
1, stainless steel elbow ball valve, globe valve, gate valve when used, only fully open or fully closed, do not allow to adjust the flow, so as to avoid the sealing surface erosion, accelerated wear. The gate valve and the upper thread stop valve have a reverse sealing device, and the hand wheel is rotated to the best position to tighten, which can prevent the medium from leaking from the packing.
2, long-term storage of stainless steel elbows, should be checked regularly, often the exposed processing surface must be kept clean, clear chu dirt, neatly stored in a ventilated and dry place in the room, it is strictly prohibited to pile or open storage. The stainless steel elbow is often kept dry and ventilated, the keeper is clean and neat, and stored according to the accurate storage method.
3, when installing, the stainless steel elbow can be directly installed on the pipe according to the connection method, and installed according to the position used.
The stainless steel elbow can be installed in any position of the pipeline, but it needs to be easy to operate the test, pay attention to the media flow of the stainless steel elbow should be under the vertical valve disc to the top, and the stainless steel elbow can only be installed horizontally. Stainless steel elbow should pay attention to the tightness when installing, affecting the normal operation of the pipeline.
